Dollies, Single and Tandem
SPECIFICATIONS
- Standard “A” frame design
- Optional Hot Dipped Galvanizing available
- Lightweight yet sturdy
- Triples rated
- Built where your trailer are built
- Custom built to your fleet
- Spring air ride suspension available
GENERAL
| Drawbar Length | 78″ center of eye to center of fifth wheel |
| Drawbar Height | 34″-35″ |
| Width | 102.36″ (across tires) |
| Fifth Wheel Height | 47.5″ (Nominal) |
| Tare Weight | 3,050 lbs |
BODY CONSTRUCTION
| Rails | .25″ thick and 6″ deep channel |
| Drawbar | Fixed tapered ‘A’ frame type with 2-3/8″ I.D. drawbar eye |
| Safety Chain | 75″ grase 8 alloy steel chain, triple rated |
| Safety Hooks | Grage 8 alloy steel with safety latch, triple rated |
| Fifth Wheel | Jost JSK37010-PM9X with roadside release handle |
| Support Gear | Steel stiffleg with fixed shoe |
SUSPENSION
| Suspension | Single axle Hutch H-9700 |
| Axle | 5″ round, 22,500 Lb rating, 77-1/2″ track, 16-1/2″×7″ with non-asbestos lining |
| Springs | 3-leaf H-356 low arch |
| Brake System | 2S-1M brake system |
| Oil Seal System | Stemco guardian with platinum performance system |
| Wheel | 22.5×8.25 steel disc |
| Tires | Low profile 22.5 radial tires |
ELECTRICAL
| Lights & Wiring | Color coded 12-volt sealed system with internal ground, and watertight molded connectors to accept sealed lamps |
PAINT & FINISH
| Paint | .All steel parts are shot blasted, coated with zinc rich primer |
| Miscellaneous | Two swing away lifting handles, one each side of drawbar. Meets counter balanced per TMC RP-721 |
| Warranty | .Limited five year warranty |
Fully Hot Dipped Galvanized to ensure durability against the wear and tear of daily used.
Fully customizable for your benefit.
Contact Us
For More Information on parts,
call your local parts representative located on the
Contact Us page or call 780-447-1970